Featured
866-428-8224
24/7 quote requests • pricing & availability support
Introduction
The Quick Attach Junior Limb Cutter is a skid steer and tractor hedge trimmer and limb cutter built for roadside clearing, fence line and hedgerow maintenance, trail cleanup, and vegetation management. It gives operators the reach and cutting capacity to tackle overgrowth from the cab.
Available for skid steers and tractor loaders, the cutter has a 48-inch cutting path and 51 dual-edge fixed teeth operating at 4,000–4,500 RPM. It cuts limbs up to 4 inches in diameter and reaches a cutting height of up to 200 inches. The head swings 90 degrees from center to either side and tilts up to 45 degrees below horizontal, helping operators work around overhanging limbs, slopes, ditch banks, and fence lines. Manual positioning comes standard; hydraulic tilt and swing are available as options. At 500 pounds and 6 to 15 GPM of auxiliary flow, it suits compact tractors and smaller skid steers..
With cutting capacity, reach, and flexible positioning in one attachment, the Junior Limb Cutter is a practical choice for routine hedge, limb, and vegetation maintenance.
For limbs up to 6 inches, step up to the Limb Cutter 4, our 48-inch tractor limb cutter, or the 72-inch Limb Cutter 6 for skid steers and excavators.
Key Features
Cover more brush and overhanging growth with each pass.
Clear substantial overgrowth along roadsides, trails, hedgerows, and field edges.
Cut through limbs and brush at rotor speeds of 4,000–4,500 RPM.
Reach elevated vegetation while operating from the machine cab.
Swing 90 degrees to either side and tilt up to 45 degrees below horizontal to reach ditch banks and slopes; hydraulic controls are optional.
Specifications
The Junior Limb Cutter brings a 48-inch cutting head to skid steers and tractor loaders that cannot carry a heavier trimmer. It weighs 500 pounds and runs on 6 to 15 GPM, and its head swings 90 degrees to either side and tilts 45 degrees below horizontal, so you can trim a hedgerow, follow a fence row, or reach down a ditch bank without repositioning the machine every few feet.
The Junior sits in the middle of our five limb cutters: a 48-inch head that cuts 4-inch limbs at 4,000-4,500 RPM with 51 teeth, swinging 90 degrees to either side with hydraulic tilt and swing available, for skid steers and tractor loaders. For limbs up to 3 inches with a simpler pin-drop swing on the same machines, see the Compact Limb Cutter. Cutting limbs thicker than 4 inches? The Limb Cutter 4 handles 6-inch limbs on skid steers, tractors and excavators, and the Limb Cutter 6 steps up to a 72-inch head and 24 feet of reach on skid steers and excavators. For a clamp-on option on an existing bucket, there's the Bucket Mount Limb Cutter.
For grass and brush at ground level, pair the Junior with a tractor brush mower or the EZ Mow skid steer brush mower.
Manufacturing
