Featured
866-428-8224
24/7 quote requests • pricing & availability support
The Quick Attach Compact Limb Cutter is a hydraulic limb cutter for tractors and skid steers, built for routine trimming along fence lines, trails, and roadsides where limbs run up to 3 inches thick.
Available as the CLC4 SS for skid steers and the CLC4 TR for tractor loaders, it combines a 48-inch cutting path with 50 dual-edge fixed teeth operating at 4,000–4,500 RPM. It cuts limbs up to 3 inches in diameter, runs on 5–15 GPM of hydraulic flow, and weighs 385 lb.
The cutter tilts up to 45 degrees below horizontal and uses a pin-drop swing to position the head along fence lines, roadsides, and other tight areas, with hydraulic swing available as an option. Its compact size makes it a practical limb trimmer for clearing overhanging limbs and brush without leaving the cab.
Cutting limbs thicker than 3 inches? The Junior Limb Cutter handles 4-inch limbs with a 90-degree swing head, and the Limb Cutter 4 and Limb Cutter 6 cut limbs up to 6 inches. Want to trim with the bucket you already own? The Bucket Mount Limb Cutter clamps onto a skid steer or tractor bucket. Only trim a few times a season? The clamp-on Bucket Mount Limb Cutter works with the loader bucket you already own.
A full 48-inch cutting head on a 385 lb attachment, so each pass covers more growth without a heavy frame on your loader.
Clear overhanging growth and routine property overgrowth.
Cut through vegetation at 4,000–4,500 RPM.
Trim overhanging limbs above fence lines and trails from the cab. Actual height depends on your loader’s lift height.
Built for 5–15 GPM of auxiliary hydraulic flow. Check your machine’s flow rating before you order.
Angle the head up to 45 degrees below horizontal for ditch banks and set the swing to work along fence lines.
