Often imitated but never duplicated the Brush Buster has been re-engineered adding a bottom deck re-enforcement ring. This keeps blades in line while increasing the overall strength of the deck. Our industry leading floating deck follows the contour's of the ground and large rear roller gives you a smooth ride but aggressive cut. The top linkage bar allows for adjustments for each machine along with creating enough resistance to cut tree's and brush which you can't achieve with straps or the rear roller alone. The combination of rear roller, floating plate, and centered linkage gives the only truly floating deck design in the market. Built from 1/4" steel with 1/2" overlapping end plates ,making them some of the strongest brush mowers manufactured. This is the most versatile mower on the market today. Use it to cut trees, brush, and unwanted weeds and grass. Its unique automatic Float-n-Tilt system allows you to cut evenly on level surfaces, as well as the most rugged terrain.
- Unique automatic Float-n-Tilt™ system follows the contours of the ground
- Available 66", 72" and 78" cutting widths
- Pressure relief system/no shear pins here
- Cut, clear, and mulch unwanted brush, thickets, grass and trees
- Break new trails, clear ditches, construction, property sites, and other overgrown areas
- Best value: powerful, versatile, great price
- Dual-edge cutting blades can be operated in reverse for longer life
- Available with John Deere Euro Mount. ( May require Hydraulic power pack)
|66” Low Flow||1,390 lb.|
|Deck Steel Thickness|
|1/4" 3 Piece||1/2"Re-Inforcement|
|Recommended Hydraulic Flow|
|66” Low Flow||13 - 17 GPM|
|66”||18 - 27 GPM|
|72”||17 - 32 GPM|
|78”||17 - 32 GPM|
|66” Low Flow||66”|
|Replacement Blade Kit|
|Factory Installed Couplers|
|66” Low Flow||901594|
I bought this mower to take care of various dirt roads and drainage ditches that connect 157 acres of farm property in Western Oregon. The fig benefit is using the flat and tilt feature to cut weeds on the side of the drainage ditches, This has really reduced the requirement for spring weeds. Thus far, has been reliable and trouble free.""
- Mike W
I have an older skid steer with lower hydraulic flow and was concerned about mower performance. Purchased the low-flow model and the mower works great. Tho floating deck also works very well.
I've had my brush mower a few months now and have used it a lot. I do weed Abatement hear in Hesperia California. Ive cut grass, sage, small trees and wild alfalfa. This mower eats it all up. I really love the float feature not really excited about the tilt stop so I disabled it. The quality of this mower is fantastic the only issues Ive had with it is it bolts coming loose due to lack of washers. lock nuts and or tread lock. I shared this feed back with them and they said theyd address this with manufacturing. Over all Im extremely happy with this mower and would but it again when the time comes.
- Matt A.
Just got a new skid steer and Im looking for was to seeing how well it works. I used it on my old one, but it was not a problem with the brush cutter, it was more the skid steer.
I have been mowing 3ft sagebrush for two years, no problems, great service.
For the money this was the most efficient mower, I used a brush mower from another competitor and had to do a lot of adjusting and stopping, Cody at Quick Attach recommended the Brush Buster as it will “float” and shut off when you raise the deck. The 40 acres we have it sage brush, and and rock. The mower worked better than I imagined. I was able to increase my speed and work around rocky areas without stopping and starting.
I purchased this brush mower with optional wheel kit and push brace. Mower works excellent. Very heavy duty. Unbelievable what this mower will grind up. Little more expensive than other brands but well worth the extra money.
A quick note to thank you for all of the help with the brush buster skid steer mower. I was comparing different brush mower attachments for my skid steer and contacted quick attachments for a price quote. I was comparing fixed deck models because I though a floating deck model would be out of my budget. When I spoke with Paul and John and Quick Attach they produced me a quote for a floating deck mower that was within my budge. I used this mower to cut approximately 45 acres of dense vegetation at three different properties. The mower floated over the ground so well that I was able to increase my mowing speed and complete the projects quicker than expected. I would highly recommend this product to anyone in the market for a brush mower.
The wait was worth it. I just came back in from running the brush buster at our shop and I must say that I was impressed. To be honest I thought the claims were a bit exaggerated- I didnt think this thing would eat much brush but I was wrong. It sure does seem to be a fine piece of equipment and has no problems at all with handling heavy brush. It will be on the pipeline right of way tomorrow and I have no doubt that it will perform better than expected. Thanks, and I am sure we will be doing more business in the future.
A few thoughts on the Brush Buster mower that I purchased, As you know I was NOT planning to buy a mower at this time, but I ended up with one and Im glad I did. At first I was actually second guessing my purchase because the floating deck takes a little getting used to. After about an hour of operation I knew this might be the best purchase ever. This attachment can do things that none of my other equipment can do. It has made mowing my fence rows a breeze. (I can stick it right under the wire on some fences) It also works wonders on cleaning out over grown ditches as well as clearing out brush and saplings in wooded areas for food plots. The areas that I have cleared with this mower will HOPEFULLY give me the opportunity to see a Boone and Crocket Buck this Fall. Thanks for a phenomenal product and great purchasing experience.
- Matt V.
Buy with Confidence
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.